Products and services
All our products are delivered with production analysis certificates from the production plant. They are supplied in round bars, annealed, free of superficial decarburization, and perfectly suitable to be mechanized or thermally treated.
Made from national raw material, or imported, from 1.00 to 30.00 mm in diameter, in 0.25 mm intervals. and also measures in inches (1.00, 1.25, 1.50, 1.75, 2.00, 2.50, 2.75, 3.00, 3.17 (1/8), 3.25, etc., up to 30 mm.) We can develop special measures at the client's request. Permanent stock in tolerance h8, but on request can be made in h7 or h6. Like all our products are delivered with certificates of analysis of casting of production plant. It is supplied in round bars, annealed, free of surface decarburization, and perfectly suitable to be mechanized or thermally treated.
In diameters from 3.00 to 200.00 mm, and with different terminations according to the needs of the client, such as grinding and polishing, coarse grinding without polishing, debarking polishing and polishing peeling. Each termination has a technical sheet that is agreed with the client.
The most worked qualities are SAE 1038/45 (with permanent stock of 8.00 to 100 mm.) SAE 1010/26, SAE 4140, SAE 8620, etc.
Se fabrican a pedido barras o vástagos de aceros rectificados, ya sea pulidos o no, o pelados pulidos, para usos en la industria agrícola, automotriz, cilindros hidráulicos, ejes y pernos para cinta transportadora, forja en frío, petróleo, etc.
We can deliver "Just in time" and always with certified quality with casting analysis.
They are manufactured from 4.00 to 200.00 mm, in grades AISI 304, AISI 310, AISI 316, AISI 410, AISI 416, AISI 420. We can offer special measures and tolerances, always with certified quality..
We perform recovery work or provide new pipes up to 200 mm in diameter, with lengths of up to 12 meters. We can chromise them at the customer's request.
Chroming of own or third-party bars, with diameters of 10 to 200 mm, with contribution of layer thickness of 25/30 microns (50/60 microns in diameter). Upon request we can chrome mayo thickness.
The tolerance is standard is h8 / h9 depending on the diameters, also being able to make other tolerances on request. Layer hardness 65/68 Rc - Resistance in salt fog chamber 80/100 Rs. minimum (ASTM B117).
In addition to this process (Bonded) we can perform normalized or annealing, both core and superficial.
Currently they are made up to 50 mm in diameter and soon up to 100 mm.
We work on request on materials from 1 to 200 mm in diameter depending on the product. It is also possible (according to diameter) to incorporate heat treatment process or chrome to them.